Clockaudio CDT100 MK3, Manual

Page: 21 / 46

2 1
MICROPHONE SETUP
The Channel Label section reflects the channel name used on the Dante
network. When using multiple CDT100 MK3 units in a daisy chain
configuration, it may be helpful to identify each microphone with a unique
name. This can be done via the Dante Controller application from Audinate.
PHANTOM POWER
Select this option to provide phantom power to connected microphones.
INPUT HPF
Select this option to apply a high pass filter to the input channel.
STEREO LINE OUT
This option places a High-Pass Filter on the stereo output at the selected
frequency.
ASYNCHRONOUS IP ADDRESS
If using an external controller, enter the IP and port in this section. The
CDT100 MK3 will report device status updates to this external device.
ARM-C
To activate motorized microphones (if installed) select the box labeled
ARM-C.
TS PORTS
Select the color of connected TS Port capacitive touch switches with the
Red, Green, Blue selection boxes and the Brightness controls. You can select
multiple colors for a wide color palette.
The SWITCH STATUS indicators let you know what TS PORT switches are
currently activated.
TS - Touch Switch
US - Third party User Switch
RS - Reed Switch