Clockaudio CDT100 MK3, Manual

Page: 30 / 46

3 0
Set TS Brightness STSB TS # (x)
x = 0 : All channels
x = [1...4] R=(10, 20, 30, 40, 50, 60, 70,
80, 90, 100)
or
G=(10, 20, 30, 40, 50, 60, 70,
80, 90, 100)
or
B=(10, 20, 30, 40, 50, 60, 70,
80, 90, 100)
Get TS Brightness GTSB TS # (x)
x = 0 : All channels
x = [1...4]
Set RGB state SRGB TS # (x)
x = 0 : All channels
x = [1...4] 0..255 0..255 0..255 RGB
intensity
Get RGB State GRGB TS # (x)
x = 0 : All channels
x = [1...4]
Set Global Brightness
Control SGBC 0..127 0..127 0..127
Get Global Brightness
Control GGBC
Display demo mode DEMO ON or OFF
Set Input
High-pass Filter SIHPF Channel # (x)
x = [1..4] Frequency, in Hz
Frequency = 0: turn off HPF
Frequency = [50..150]
Get Input
High-pass Filter GIHPF Channel # (x) x = [1..4]
Set Output
High-pass Filter SOHPF Frequency, in Hz
Frequency = 0: turn off
HPF
Frequency = 50 – 150
Get Output
High-pass Filter GOHPF
Set Test Mode TESTMODE Test mode (x)
x = 0: turn off test mode
x = 1: Demo mode
x = 2: TS Port Test mode
x = 3: VU Meter mode
x = 4: Latency Test mode