Climax H&S TOOL SPEED FACER ODF100, Operating Manual

Page: 30 / 132

Page 12 ODF Speed Facer Operating Manual
2.2 C
ONTROLS
2.2.1 Pneumatic motor controls
The ODF Speed Facer pneumatic controls are located on the pneumatic conditioning unit
(Air Caddy), shown in Figure 2-3 on page 12.
F
IGURE
2-3.
PCU
COMPONENTS
1
2
6
7
5
8
9
10
11
3
4
T
ABLE
2-3. PCU
CONTROLS IDENTIFICATION
Number Component Function
1
Air hose quick dis-
connect
1
Connects the PCU to the operator’s compressed air source.
2 Air supply lock-out
Isolates air pressure from the machine and provides the ability to lock the valve
closed before performing maintenance.
3 Regulator
Controls the air pressure supplied to the machine. The regulator is preset at the
factory and does not require adjustment.
4 Start (system reset) Resets the low-pressure dropout.
5 Emergency
STOP
Isolates the supply air and vents the downstream air. Press down to stop the
machine; pull up to reset.
6 Oil drip rate dial
Controls the air lubricator drip rate. For more information, see Section 5.3.2 on
page 74.
7
Speed adjustment
valve Controls the machine’s rate of rotation and is located on the exhaust of the
pneumatic assembly.
8
Air hose to the
machine
Supplies the air to the machine.
9 Oil reservoir Holds lubricating oil Mobil Almo 525 for the machine air motor.