Climax H&S TOOL SPEED FACER ODF100, Operating Manual

Page: 19 / 132

P/N 102615, Rev. 0 Page 1
1 INTRODUCTION
IN THIS CHAPTER:
1.1 H
OW TO USE THIS MANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
1.2 S
AFETY ALERTS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
1.3 G
ENERAL SAFETY PRECAUTIONS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
1.4 M
ACHINE
-
SPECIFIC SAFETY PRECAUTIONS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
1.5 R
ISK ASSESSMENT AND HAZARD MITIGATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3
1.6 R
ISK ASSESSMENT CHECKLIST
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
1.7 L
ABELS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
1.7.1 L
ABEL IDENTIFICATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5
1.1 H
OW TO USE THIS MANUAL
This manual describes information necessary for the
setup, operation, maintenance, storage, shipping, and
decommissioning of the ODF Speed Facer.
The first page of each chapter includes a summary of
the chapter contents to help you locate specific infor-
mation. The appendices contain supplemental product information to aid in setup, operation, and maintenance
tasks.
Read this entire manual to familiarize yourself with the
ODF Speed Facer before attempting to set it up or oper-
ate it.
1.2 S
AFETY ALERTS
Pay careful attention to the safety alerts printed
throughout this manual. Safety alerts will call your
attention to specific hazardous situations that may be
encountered when operating this machine.
Examples of safety alerts used in this manual are
defined here
1
:
DANGER
indicates a hazardous situation which, if not
avoided,
WILL result in death or severe injury.
WARNING
indicates a hazardous situation which, if not
avoided,
COULD result in death or severe injury.
CAUTION
indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE
indicates a hazardous situation which, if not
avoided, could result in property damage,
equipment failure, or undesired work results.
1.3 G
ENERAL SAFETY PRECAUTIONS
H&S leads the way in promoting the safe use of portable
machine tools. Safety is a joint effort. You, the end
user, must do your part by being aware of your work environment and closely following the operating proce-
dures and safety precautions contained in this manual,
as well as your employer’s safety guidelines.
1. For more information on safety alerts, refer to
ANSI/NEMA
Z535.6-2011, Product safety Information in Product Manuals, Instruc-
tions, and Other Collateral Materials
.