10
© 2 0 0 8 D i r e c t e d E l e c t r o n i c s - A l l r i g h t s r e s e r v e d .
➤
Press
a second time within five seconds: The siren
chirps twice followed by a long chirp. Zone 2 is now
bypassed.
➤
Press
three times followed by a long chirp. Zone 4 is
now bypassed.
➤
Press
a fourth time within five seconds: The siren chirps
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
➤
Press
a fifth time within five seconds: The siren chirps
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
➤
Continued pressing of
will begin the Multi-Level
Security Arming cycle over again.
arming while driving
Your system can be armed while driving the vehicle. Simply press
on your transmitter for two seconds while the vehicle is
running or while the ignition is on. The siren will chirp once and
then once more to indicate that the ignition is on. The security
system will not respond to any input except the door triggers and the
Failsafe® Starter Kill (if installed) will not be activated. The security
system will disarm automatically whenever the ignition is turned off.
The siren will chirp twice and the LED will stop flashing.
➜
note:
Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
G426V_2008_08a.qxd 8/13/2008 10:22 AM Page 10
U
K
A
pproval Auth
or
it
y
24-Mar-10
