© 2007 directed electronics
51
blackjax* deactivation sequence
To deactivate BlackJax* turn the key on and then enter the PIN code at any time.
bypass blackjax* temporarily (if programmed on in feature
grid)
Bypass BlackJax* temporarily
1.
Turn ignition on.
2.
Enter PIN code. Do not enter valet or programming mode.
3.
Within 10 seconds: Press
button of remote control.
4.
Siren chirps 1 time as confirmation of BlackJax* bypassed.
5.
Turn Ignition Off, siren chirps 3 times as confirmation of exiting programming.
N
NO
OTTEE:: If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
To return to normal BlackJax* Operation
1.
Turn ignition on.
2.
Enter Pin code.
3.
Within 10 seconds: Press
button of remote control.
4.
Siren chirps 2 times as confirmation of BlackJax* active.
5.
Turn ignition off, siren chirps 3 times as confirmation of exiting programming.
N
NO
OTTEE:: If ignition remains on after entering PIN code and no action for 10 seconds,
unit will automatically exit programming mode without chirps.
blackjax* off warning indicator
Each time the ignition is turned off when BlackJax* is bypassed the LED will flash 10
times as a visual reminder.
* This feature is not evaluated by Thatcham.
N919730P_01-07.qxd 1/12/07 3:41 PM Page 51
U
K
A
pproval Auth
or
it
y
24-Mar-10
