www.directed.com
50
blackjax* feature
blackjax activation sequence
When BlackJax is programmed ON, BlackJax sequence will begin every time the igni-
tion is turned on and must be turned off by entering the PIN code. It will then activate
again while driving when triggered as described below.
N
NO
OTTEE:: BlackJax can be turned off by entering PIN code at any time.
1.
Ignition on (engine does not have to be running)
z
System sees input on Zone 7 ignition input.
2.
Door Open & Close.
z
System sees input on H1/4 or H1/14 Door trigger input.
3.
Press and release brake pedal.
a.
System sees (+) input on H2/4 BROWN/WHITE brake input/output wire.
b.
System then begins monitoring input on H1/2 VIOLET/BLACK wire or
Intellistart 4.
c.
System sees RPM at or above 2 x programmed rate, BlackJax begins 20
second countdown.
4.
After a 20 second countdown:
a.
5 siren chirps as reminder to enter PIN code.
b.
Brake light relay pulses (+) 12v on H2/4 BROWN/WHITE to flash brake
lights.
c.
You then have 20 more seconds to enter PIN to turn off Blackjax.
5.
If PIN code is NOT entered within 20 seconds:
z
System sounds siren and begins flashing indicator lights.
z
Brake lights continue to flash.
z
The system will now immobilise as described in steps 6-7.
6.
If system sees the RPM rate return to 1 ½ times programmed RPM rate or lower,
the system will immobilise the vehicle as described in step 7
7.
Vehicle Immobilisation:
z
immobiliser will engage the starter and ignition circuits.
z
The siren will continue to sound and the indicator and brake lights will flash
for a maximum of 5 minutes.
z
Immobilisation circuits will remain active until correct PIN code is entered.
N919730P_01-07.qxd 1/12/07 3:41 PM Page 50
U
K
A
pproval Auth
or
it
y
24-Mar-10
