www.directed.com
34
user selectable features descriptions - column two
change pin code
z
This feature allows you to change the user's personal PIN code. For more infor-
mation, see programming note #4. The factory default PIN code is noted on the
back of the Owner’s guide.
remote valet on/off
z
Off: The alarm can not be put into valet mode with the remote control.
z
On: The alarm can be put into valet mode with the remote control.
entry delay on/off
z
Off: There is no entry delay when the system has passively armed. The system
will trigger instantly when a door is opened.
z
On: If the system has passively armed, it will not trigger for 15 seconds after a
door is opened allowing the user to enter the vehicle and disarm the system via
the PlainView 2 Valet switch.
reset all features to factory settings
z
All system settings (except PIN and remote programming) in the User
Programming grid will be reset to their default factory setting as indicated in
bold lettering. No installer programmable features will be changed.
z
Press the arm/disarm button of the TX; the siren will chirp twice as confirmation.
auto start setting - off/battery only/temp only/battery and temp
z
This feature is only available with the IntelliStart* option.
z
Off: The vehicle will not autostart.
z
Battery: The vehicle will only autostart when the car battery voltage has dropped
to a preset level.
z
Temperature: The vehicle will only autostart at a preset low temperature.
z
Battery and temperature: The vehicle will autostart with a low voltage car battery
or low temperature.
N
NO
OTTEE:: Temperature and battery calibration and settings can only be made with the
Cliffnet Wizard or Wizard Pro programming software.
blackjax* on/off
z
Off: The system cannot enter BlackJax mode.
z
On: The system will enter BlackJax mode when triggered.
N919730P_01-07.qxd 1/12/07 3:41 PM Page 34
U
K
A
pproval Auth
or
it
y
24-Mar-10
