11
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
transmitter sensor disable
To temporarily disable a sensor input, arm the system, press
twice
and then
. The lights will flash four times and all warn away trig-
ger zones one, two, three, and eight are bypassed. Press the buttons
again; the lights flash four times and both warn away and full trigger
zones one, two, three, and eight are bypassed until the system is dis-
armed. This can be performed anytime the system is armed.
1.
Arm the system.
2.
Press
twice and then
.
3.
The lights will flash four times; all warn away zones are now
bypassed.
4.
Transmit the sensor bypass channel again. (Press
twice
and then
.)
5.
The lights will flash four more times; the sensor warn away
and full trigger zones are now bypassed.
6.
The sensor zones will reset when disarmed.
intellistart and smartwindows sensor bypass
When the system sees a command to start the vehicle via the
Intellistart, it bypasses sensor zones and will continue to bypass these
zones until the remote start shuts down.
When the system sees a SmartWindows command for up or down
operation, the unit will automatically bypass sensor zones one, two,
three, and eight until the windows complete their operation.
G919730P_01-07.qxd 1/12/07 3:38 PM Page 11
U
K
A
pproval Auth
or
it
y
24-Mar-10
