www.directed.com
32
grid entry. Now program the features by entering the columns and rows as
described previously.) 3 chirps are always heard when entering installer
programming grid and 1 chirp when entering user programming grid.
N
NO
OTTEE:: Refer to the Feature Descriptions sections of this guide for important notes and
descriptions of the system features and programming.
7.
Exit programming - Once you have completed programming you can exit pro-
gramming mode by turning the ignition off or wait 60 seconds without pressing
the PlainView 2 Valet switch. The siren will chirp three times to indicate program-
ming mode has been exited.
user selectable features
*
This feature is only available with optional IntelliStart connected.
**
This feature is only available with optional SmartWindows connected.
*** 5-button transmitters only. To program 4-button remote controls use New remote learn in column 3.
**** This feature is not evaluated by Thatcham.
Off
/ On
Off/On
/Quiet
Off
/Ignition/RPM
Off
/On
Off
/Ignition
Off/
On
Off
/On
Off
/On
Off
/On
N919730P_01-07.qxd 1/12/07 3:41 PM Page 32
U
K
A
pproval Auth
or
it
y
24-Mar-10
