Clevo W760K, User Manual

Page: 141 / 230

Modules & Options
3.75G/HSPA Module 7 - 37
7
11. The module will still be on, and you will need to press the Fn + key combination
to turn it off.
12. If you click the Mobile Partner close icon a message will be displayed asking
you to click OK to confirm the program exit and to terminate the connection .
13. Exiting the program terminates the connection, but DOES NOT turn off the 3.75G/
HSPA module, and you will need to press the Fn + key combination to turn off
the module (pay careful attention to this aboard aircraft - see “Wireless Device
Operation Aboard Aircraft” on page 7 - 33 ).
14. If the module is on and the computer enters a power-saving state, then the power
status of the module on resuming from the power-saving state will be as below:
• If the 3.75G/HSPA module is on and the computer is Shut Down or Restarted ;
the module will be off when the computer starts up.
• If the 3.75G/HSPA module is on and the computer enters Sleep or Hibernate ;
the module will be off when the computer resumes from sleep.
Figure 7 - 33
Exit Prompt