Clevo W760K User Manual Download Page 137

Page: 137 / 230

Modules & Options

3.75G/HSPA Module 7 - 33

Mobile Partner

With the

3.75G/HSPA

module and USIM card (supplied by your service provider)

installed you may then install the

Mobile Partner

application. The

Mobile Partner

application allows you to directly access your HSPA internet service from the com-
puter.

Mobile Partner Application Installation

Enable power to the module by pressing the

Fn +

key combination (the

on screen icon

will indicate the module’s power status). If a

Found

New Hardware

window appears, click

Cancel

in all windows that appear,

and then proceed to install the driver as below.

2. Insert the

Device Drivers & Uti User’s Manual

disc

into the CD/

DVD drive.

3. Click

Option Drivers

(button).

4. Click

3.Install 3G Driver

> Yes

5. Choose the language you prefer and click

6. Click

I Agree

(button) to accept the license agreement.

7. Click

Next > Install

8. Click

Finish

to restart the computer.

9. Access the

Mobile Partner

application from the

Start

menu (

Start > Pro-

grams/All Programs > Mobile Partner

), or by double-clicking the

Mobile

Partner

icon on the desktop.

Wireless Device

Operation Aboard

Aircraft

The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.

Use the

Fn +

key com-

bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see

Table 1

- 6, on page 1 - 14

Table 1

- 4, on page 1 - 10

Summary of Contents for W760K







































































































































































































































Search results

Summary of Contents for W760K

Reviews:

Related manuals for W760K

Brands by name

Popular brands

Clevo W760K, User Manual

Search results

Summary of Contents for W760K

Reviews:

Related manuals for W760K

Brands by name

Popular brands