Installation Guide_PV-ezRack_SolarTerraceIII-A_AU_V2.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
21
page
of 28
5.3.1.2 When there is an odd number of PV Module in each row
Install the Grounding clips at the positions marked X in the figure shown. Then the number
of Grounding clips = number of PV M1. Eg: 6 Grounding clips in the figure shown.
Key point:
When replacing a defective single PV Module, it is required to replace the Grounding Clip
under the PV Module, as they are intended for single use only.
5.3.2 Place the PV Modules on the Rails, and fix them with End Clamps and Inter Clamps or
Universal Clamps, then fasten them with the Allen key. Please choose either Solution 1 or 2
below, according to your project.
Solution 1(Apply End Clamps and Inter Clamps)
Step 1 Place the first PV Module on the T Rails according to your plan and apply the End
Clamps to fix it in place. Then fasten lightly with the Allen Key as shown in Figure 19.
Fig. 19
Installation Instruction
