Installation Guide_PV-ezRack_SolarTerraceIII-A_AU_V2.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
10
page
of 28
2.3 Range of Adjustment
The system can be adjusted using the anchor plates below. Table 2.3.1 below indicates the range of
adjustment depending on the front or rear legs and if you are using either a U or L anchor plate.
Depending on the system design, there is another option to concrete footings and that is using Ground
Screw methodology, which is defined in more detail on pages 25-27. The table below defines the range of
adjustments for the support structure when using this method.
Planning
2.3.1 Installation with Concrete Foundation
Adjustable area
Front leg Up-down
Front leg North-South
Front leg East-West
Rearleg Up-down
Rearleg North-South
Rearleg East-West
Adjustable part
Corrugated U-anchor Plate
Corrugated U-anchor Plate
NA
Corrugated L-anchor Plate
Corrugated L-anchor Plate
NA
Adjustable Range
±20mm
±7.5mm
--
±20mm
±7.5mm
--
2.3.2 Installation with Ground Screw
Adjustable area
Front leg Up-down
Front leg North-South
Front leg East-West
Rearleg Up-down
Rearleg North-South
Rearleg East-West
Adjustable part
NA
Ground Screw
NA
NA
Ground Screw
NA
Adjustable Range
--
±7.5mm
--
--
±7.5mm
--
Corrugated U-anchor Plate (at Front leg)
Corrugated L-anchor Plate (at Rear leg)
