Installation Guide_PV-ezRack_SolarTerraceIII-A_AU_V2.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
17
page
of 28
Installation Instruction
5.1.2 Fix the Pre-assembled Support to the Concrete Footings.
Fix the Pre-assembled Support to the Concrete footings laid using the dimensions indicated by
the tables in the Planning section. Use embedded M16 (Grade 5.8 Carbon Steel anchor studs
or similar). Adopt the minimum anchor embedded depth according the anchors manufacturer's
Manual. The up-down adjustable range of the Front/Rear leg is ±20mm.The north-south adjustable
range of the Front/Rear leg is ±7.5mm
.
Recommended Torque:
M16: 135~150N·m
5.1.3 Check the System and Fasten
all Bolts with Recommended Torque.
Recommended Torque:
M8 Bolt: 13N·m;
M8 Nut: 18~20N·m
M12: 40~45N·m
Fig. 11
Fig. 12
±20mm
±20mm
±7.5mm
±7.5mm
To achieve earthing/
grounding function,
fasten the M8*12 bolt
within 4.5-5.5 N·m
