Installation Guide_PV-ezRack_SolarTerraceIII-A_AU_V2.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
27
page
of 28
5.4.4 Follow steps 1-4 or steps 6-9 (on page 16 and 17 depending on either a 30 or 20 degree tilt
support) to unfold and construct the pre-assembledsupport
.
5.4.5 Connect the Pre-assembled Support to the Ground Screw by using Hexagonal Bolt M16*50(with
Nut and washer)
Recommended Torque:
M16: 135~150N·m
Ground screw connection plate enables the connection of either U or L anchors, which also allows
some adjustment to the support structure as shown in Fig 33 above.
±20mm
±7.5mm
±20mm
±7.5mm
Installation Instruction
Fig. 33
