FieldSmart
®
Fiber Active Cabinet (FAC) 400
Installation Manual
_________________________________________________________
Proprietary Information: Not for use or disclosure except by written agreement with Clearfield.
116
Step 1:
Step 2:
Installing a 1:32 Splitter and Integration Kit
This topic describes how to install the 1:32 PON fiber splitter and the splitter integration kit. The integration kit includes the
splitter mounting cage, retaining pin, and mounting hardware. The mounting cage can house up to (6) 1:32 splitters. The
splitter assembly and the integration kit are ordered and packaged separately but installed together in the field.
Note:
When the integration kit is ordered as an FAC 400 factory option, it is installed in the cabinet at the factory.
To install the splitter mounting cage
Install the splitter mounting cage.
a. Position the mounting cage against the vertical rail behind the mounting frame as shown, aligning the (2)
holes.
b. Attach the mounting cage to the vertical rail using (2) supplied screws. Tighten the screws to secure the
assembly in place.
Install the splitter retaining pin assembly.
a. Hold the retaining pin lanyard against the vertical rail, above the splitter cage.
b. Attach the lanyard to the vertical rail using (1) supplied screw. Tighten the screw to secure the lanyard in
place.
