- 188 -
CT-S280
• Setting MSW 1 (a=1)
n b (Set Value)
Function
1
48 (Default)
Reports the power on.
49
Does not report power on.
2
48 (Default)
Sets input buffer capacity to 4K bytes.
49
Sets input buffer capacity to 45 bytes.
3
48 (Default)
Sets input buffer full and offline to be Busy.
49
Sets to be busy with input buffer full.
4
48 (Default)
At the occurrence of receiving error, replaces the data with
“?”.
49
At the occurrence of receiving error, ignores the data.
5
48 (Default)
Disables CR (0DH).
49
Enables CR (0DH).
6 48 (Default)
Reserved
7
48 (Default)
Does not reset at serial I/F pin 6.
49
Resets at serial I/F pin 6.
8 48 (Default)
Reserved
• Setting MSW 2 (a=2)
n b (Set Value)
Function
1 49(Default)
Reserved
2 48(Default)
Reserved
3
48 (Default)
Enables stored printing.
49
Disables stored printing.
4
48 (Default)
Immediately after digit reaches full, line-feed is taken.
49
Immediately after digit reaches full, data wait is taken.
5
48 (Default)
After cover close and PE recovery, prints as it is.
49
After cover close and PE recovery, prints from the
beginning using PAGE MODE, barcode, image,
double-height printing, etc. as a unit.
6 49 (Default)
Reserved
7 48 (Default)
Reserved
8
48 (Default)
Enables PNE.
49
Disables PNE.
• Setting MSW 3 (a=3)
n b (Set Value)
Function
1 48 (Default)
Reserved
2 48 (Default)
Reserved
3
48 (Default)
Resets with parallel pin 31.
49
Does not reset with parallel pin 31.
4 48 (Default)
Reserved
5 48 (Default)
Reserved
6 48 (Default)
Reserved
7
48
Sets CBM270-noncompatible mode.
49 (Default)
Sets CBM270-compatible mode.
8
48 (Default)
Sets cover open error during printing to be auto recovery
error.
49
Sets cover open error during printing to be recoverable
error.
