- 316 -
[Outline]
[The specification which is common to the model]
CT-S801II
/
CT-S851II
/
CT-S601II
/
CT-S651II
/
CT-S251
• Start and End of watermark printing are specified. (Starting: start = 1, Endign: start = 0)
• When the watermark printing start is specified, the image data defined by the key code (kc1, kc2) is printed
simultaneously (overlay printing), when printing other printing data as watermark printing.
• When the End is specified, it becomes watermark printing invalid, and parameters (kc1 ~ repeat4) discards.
• size is the number of bytes after the start. (15 fixed)
• path is the number of blank vertical dot line until the start of the first overlay immediately after the watermark
printing start. (It is not affected by GS P basic calculation pitch)
• feed is the number of blank vertical dot line spacing of image data and image data. (It is not affected by GS P
basic calculation pitch)
• repeat is the repetition number of times of the watermarks printing. (Infinite at 0)
[Caution]
• Use in page mode to specify start before the print start command (FF or ESC FF), and End specification is
carried out immediately after.
• The watermark picture cannot turn and handstand.
• During the GS v m n(1D 56 m n) cut & feed, it is not possible to watermark printing.
• Other than this command, ends the watermark printing under the following conditions.
-> When ESC @ (1B 40) is received.
-> When buffer clear command(DLE DC4 ( 10 14 ) 8 1 3 20 1 6 2 8) is received.
-> When the error return command (DLE ENQ ( 10 05 ) 2) is received at the time of return
possible error occurrence.
• In the case of Standard mode, it is not possible to watermark printed on the bar code and the visible code.
*If print of a bar code is started during the watermark printing, watermark image is divided.
• During watermark printing, and more if the start of the watermark printing is specified, suspend a watermark
print setting during printing, and operates with the new watermark printing settings.
