- 183 -
GS p n
Support model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310 II
[Function]
Changing paper type
[Code]
<1D>H <70>H <n>
[Range]
0≤n≤255
n=0 specify receipt paper
n=1 specify label paper
n=2 specify black mark paper
[Outline]
[The specification which is common to the model]
• Switches paper.
• n= 0: Switches to receipt paper (mode).
Ignores this command when receipt mode is set.
• n = 1: Switches to label paper mode.
Measures paper length or sets first position of paper in accordance with the MSW setting.
Ignores this command when label paper mode is set.
• n= 2: Switches to BM paper mode.
Measures paper length or sets first position of paper in accordance with the MSW setting.
Ignores this command when BM paper mode is set.
[Caution]
[The specification which is common to the model]
• Processed after buffering.
• This command is not initialized by the initialization command.
• This command is initialized by power OFF and paper type set by MSW is valid from the
next power ON.
• When BM paper/Label paper mode is changed to receipt mode
Change the paper to receipt paper after sending this command (n=0) with BM paper/label
paper set. If the paper is changed to receipt paper beforehand, sensing the first position
is not available when closing the cover, resulting in BM/label detection error.
• When receipt mode is changed to label mode
Send this command (n=1) after changing the paper from receipt paper to label paper. If
this command is sent beforehand, label detection error is caused.
