- 231 -
CT-S801(II)
/
CT-S851(II)
• a=116: Sets the paper specified by (nL+nH×256).
(nL+nH×256)
Paper
1(Default)
Specified single color paper.
257
Recommended 2-color paper5
• a
＝
151: Sets the Bluetooth Security/Connect Device specified
by (nL+nH×256). [CT-S801II, CT-S851II]
(nL+nH×256)
Security / Connect Device
1(Default)
Low / All
2
Middle / All
3
Middle / Paired
4
High / All
5
High / Paired
• a
＝
155: Sets the Bluetooth device scan specified by (nL+nH×256).
[CT-S801II, CT-S851II]
(nL+nH×256)
BT Device Scan
1
No Response
2(Default)
Discoverable
• a
＝
156: Sets the Bluetooth Auto Reconnect request specified
by (nL+nH×256). [CT-S801II, CT-S851II]
(nL+nH×256)
Auto Reconnect
1
Invalid
2(Default)
Valid
• a=201: Outputs ACK to the position specified by (nL+nH×256).
(nL+nH×256)
ACK Output Position
1(Default)
ACK-in-Busy
2
ACK-while-Busy
3
ACK-after-Busy
• a=202: Controls input buffer full Busy with the value selected by
(nL+nH×256) and controls Busy with output/cancel timing
(remaining capacity).
(nL+nH×256)
When Input Buffer
Capacity “Small” is Set
When Input Buffer
Capacity 4K Bytes
(Large) is Set
Output
Cancel
Output
Cancel
1
16
26
128
256
2
16
40
128
512
3
30
50
72
256
4
30
60
72
512
• XON/XOFF is also output by the establishment of conditions.
• Ignores the data received when input buffer idle capacity is 0.
• a=212: Selects DMA (Direct Memory Access) control of serial
communication specified by (nL+nH×256).
(nL+nH×256)
DMA control
1
Invalid
2(Default)
Valid
