- 382 -
4.2 Details of Memory Switches
This section describes the function of memory switch.
Some MSW may not be set or some values may not be selected depending on the model used. For the
MSW and value that can be set or selected with the model you are using, refer to the operation manual
or the like.
4.2.1 MSW1
●MSW1-1: Setting the power ON notify
[Outline] At power ON, to notify the host of the printer power ON, printer can send to host 3 byte power ON notify
status data ( 3BH 31H 00H).
Set to enable/disable for sending the power ON notify status data.
OFF(0)
ON(1)
Power ON Info
Valid
Not send
ON (1) OPERATION:
Function to notify power ON is disabled, sending no status to host.
OFF (0) OPERATION:
Function to notify power ON is enabled, sending status to host.
●MSW1-2: Input buffer
[Outline] Select the input buffer (receive buffer) size.
OFF(0)
ON(1)
Buffer Size
4Kbytes
45bytes
ON (1) OPERATION: Input buffer size is set to 45 bytes.
From when free area decreases to 16 bytes until it increases to 26 bytes, receive buffer is full with printer
BUSY status.
OFF (0) OPERATION: Input buffer size is set to 4K bytes.
From when free area decreases to 128 bytes until it increases to 256 bytes, receive buffer is full with printer
BUSY status.
