Wireless
Radio
Cisco Small Business WAP371 Wireless Access Point Administration Guide
64
5
-
Off—The WAP device ignores TSPEC requests from client stations. Use this setting
if you do not want to use TSPEC to give QoS-capable devices priority for time-
sensitive traffic.
•
TSPEC Voice ACM Mode—Regulates mandatory admission control (ACM) for the
voice access category. By default, TSPEC Voice ACM mode is off. The options are:
-
On—A station is required to send a TSPEC request for bandwidth to the WAP
device before sending or receiving a voice traffic stream. The WAP device responds
with the result of the request, which includes the allotted medium time if the TSPEC
was admitted.
-
Off—A station can send and receive voice priority traffic without requiring an
admitted TSPEC; the WAP device ignores voice TSPEC requests from client
stations.
•
TSPEC Voice ACM Limit—The upper limit on the amount of traffic the WAP device
attempts to transmit on the wireless medium using a voice AC to gain access. The
default limit is 20 percent of total traffic.
•
TSPEC Video ACM Mode —Regulates mandatory admission control for the video
access category. By default, TSPEC Video ACM mode is off. The options are:
-
On — A station is required to send a TSPEC request for bandwidth to the WAP
device before sending or receiving a video traffic stream. The WAP device responds
with the result of the request, which includes the allotted medium time if the TSPEC
was admitted.
-
Off — A station can send and receive video priority traffic without requiring an
admitted TSPEC; the WAP device ignores video TSPEC requests from client
stations.
•
TSPEC Video ACM Limit—The upper limit on the amount of traffic that the WAP
device attempts to transmit on the wireless medium using a video AC to gain access.
The default limit is 15 percent of total traffic.
•
TSPEC AP Inactivity Timeout—The amount of time for a WAP device to detect a
downlink traffic specification as idle before deleting it. The valid integer range is from
0 to 120 seconds and the default is 30 seconds.
•
TSPEC Station Inactivity Timeout—The amount of time for a WAP device to detect an
uplink traffic specification as idle before deleting it. The valid integer range is from 0
to 120 seconds and the default is 30 seconds.
•
TSPEC Legacy WMM Queue Map Mode—Enables or disables the intermixing of
legacy traffic on queues operating as ACM. By default, this mode is off.
STEP 6
Click Save. The changes are saved to the Startup Configuration.
