Captive Portal
Instance Association
Cisco Small Business WAP371 Wireless Access Point Administration Guide
134
9
•
Key 1—The shared secret key that the WAP device uses to authenticate to the primary
RADIUS server. You can use up to 63 standard alphanumeric and special characters.
The key is case sensitive and must match the key configured on the RADIUS server.
The text you enter is shown as asterisks.
•
Key 2 to Key 4—The RADIUS key associated with the configured backup RADIUS
servers. The server at Server IP (IPv6) Address 2 uses Key 2, the server at Server IP
(IPv6) Address 3 uses Key 3, and so on.
•
Locale Count—The number of locales associated with the instance. You can create and
assign up to three different locales to each CP instance from the Web Customization
page.
•
Delete Instance—Deletes the current instance.
STEP 6
Click Save. Your changes are saved to the Startup Configuration.
Instance Association
Once you create an instance, you can use the Instance Association page to associate a CP
instance to a VAP. The associated CP instance settings applies to users who attempt to
authenticate on the VAP.
To associate an instance to a VAP:
STEP 1
Select Captive Portal > Instance Association in the navigation pane.
STEP 2
Select the radio interface on which you want to configure an instance association.
STEP 3
Select the instance name for each VAP you want to associate an instance to.
STEP 4
Click Save. Your change are saved to the Startup Configuration.
