Client Quality of Service
ACL
Cisco Small Business WAP371 Wireless Access Point Administration Guide
109
7
•
Destination MAC Address—Select this field and enter the destination MAC address to
compare against an Ethernet frame.
•
Destination MAC Mask—Enter the destination MAC address mask to specify which
bits in the destination MAC to compare against an Ethernet frame.
For each bit position in the MAC mask, a 0 indicates that the corresponding address bit
is significant and a 1 indicates that the address bit is ignored. For example, to check only
the first four octets of a MAC address, a MAC mask of 00:00:00:00:ff:ff is used. A
MAC mask of 00:00:00:00:00:00 checks all address bits and is used to match a single
MAC address.
•
VLAN ID—Select this field and enter the specific VLAN ID to compare against an
Ethernet frame.
This field is located in the first/only 802.1Q VLAN tag.
STEP 5
Click Save. The changes are saved to the Startup Configuration.
NOTE
To delete an ACL, ensure that it is selected in the ACL Name-ACL Type list, select Delete ACL,
and click Save.
NOTE
An ACL can only be deleted when it is not associated to any VAP.
