Cisco TES301, User Manual

Page: 74 / 138

Chapter 4 Configuring Advanced Settings
56 4038767 Rev B
Field Description
Static Routing
Set Up Static Routes
1
To set up a static route between the Gateway and another
network, select a number from the
Select set number drop-
down list. (A static route is a pre-determined pathway that
network information must travel to reach a specific host or
network.)
2
Enter the following data:
– Enter Router Name —The Router Name identifies the
host.
–
Destination —The Destination IP Address is the address
of the network or host to which you want to assign a
static route.
–
Subnet Mask —The Subnet Mask determines which
portion of an IP address is the network portion, and
which portion is the host portion.
–
Gateway —This is the IP address of the gateway device
that allows for contact between the Gateway and the
network or host.
3
Depending on where the Destination IP Address is located,
select
LAN & Wi-Fi or WAN (internet) from the Interface
drop-down menu.
4
To save your changes, click the Save button. To cancel your
unsaved changes, click the Cancel button. For additional
static routes, repeat steps 1-4.
Delete a Static Route
1
To delete a static route, choose the route from the Select set
number drop-down list.
2
Click the Delete button.
3
Click the Save Changes button.