VoIP Settings
4038767 Rev B
29
6
Complete the Outbound Proxy Server fields.
Note
: Use the scroll bar to access all of the fields on this screen.
Outbound Server Option
—Select Disabled to ignore the Outbound Server
feature.
Outbound Server
—If the Outbound Server Option is enabled, provide the
host name or IP address of the outbound proxy server. If an Outbound
Server is specified, the device will send all SIP traffic (requests and
responses) to the host and port indicated.
Outbound Proxy Server port
—Enter the destination port to be used to
connect to the outbound proxy.
7
Complete the Local Settings fields.
Note
: Use the scroll bar to access all of the fields on this screen.
SIP Local Port
—Enter the port used for incoming and outgoing call control
signaling.
RTP Local Port
—Enter the lowest value allowed for the port range to be used
for incoming and outgoing RTP streams.
8
Click
Save Changes
to save the information or
Cancel
to return to the
dashboard.
Service
This tab allows you to configure call forward features for subscriber lines 1 and 2
separately.
Enter commonly used numbers into the speed dial entry list.
Enter the numbers you do not want to receive into the call block entry list.
Complete the following steps to configure the Service parameters for your VoIP
settings.
Summary of Contents for TES301
