Chapter 1 Introducing the TES301 IP Managed Services Home Gateway
6
4038767 Rev B
What's on the Back Panel?
The back panel of your TES301 provides ports, power, and reset mechanisms. Refer
to the following diagram for a description of the back panel.
Note
: This illustration may vary from the actual product.
1
Power
—The Power port is where you will connect the power adapter that is
included in the box.
2
Power Switch
—Use this switch to power on or off the TES301.
3
Phone 1-2
—The Phone ports connect standard analog telephones to the TES301.
4
Internet
—The Internet port connects to the Ethernet port on the DSL, fiber, or
cable modem.
5
Ethernet LAN 1-4
—These Ethernet ports (1, 2, 3, 4) connect your TES301 to
computers and other Ethernet network devices.
6
USB
—The USB port connects to a USB storage device, such as a USB hard drive
or flash disk.
7
Reset
—The Reset button restores the TES301 to its original factory settings by
holding down the Reset button for 5 seconds.
Note:
The reset button will restore the voice settings to the factory defaults,
which is to erase all SIP configurations.
Summary of Contents for TES301
