Cisco TES301, User Manual

Page: 58 / 138

Chapter 3 Configuration and Operation of the TES301
40 4038767 Rev B

For wireless client mode, select the Wi-Fi Range Extension radio button;
then, configure the fields on the page once it refreshes.
–
Name (SSID) —This field is auto-populated with the name of the
associated Access Point. If you want to enter a different SSID, click the
Add SSID manually check box; then, enter the SSID you wish to
configure.
–
Add SSID manually —Select this option to make the Name (SSID) field
configurable.
–
Security Mode — Select the security mode of the associated Access Point,
Disabled (default), WPA , or WPA2 . If you select WPA or WPA2, the
Passphrase field appears.
– Passphrase —Enter the passphrase of the associated Access Point.
–
Rescan —Click this button to refresh the list of AP devices within range of
your TES301. Some devices may become inactive based on configuration
settings.
– Internet Connection Type —The Wi-Fi Range Extension supports two
connection options, DHCP or Static. From the drop-down menu, select
DHCP to enable the DCHP server on your network to assign an IP
address. Select Static if you prefer to manually assign an IP address.
– DRM Downstream Network Settings —If the TES301 is configured as a
wireless client and connected to an active wireless network, it can, at the
same time, act as an Access Point and create a downstream wireless
network (downstream from the original wireless network) using a
configurable SSID.