Cisco TES301, User Manual

Page: 73 / 138

Setup
4038767 Rev B 55
Advanced Routing
On the Advanced Routing screen, you can set the routing mode and settings of the
gateway. Router mode is recommended.
Field Description
Operating Mode
Use the default setting, Router , if the gateway is hosting your
networks connection to the Internet. Select Bridge if the
gateway operates on a network with other routers or gateways.
Dynamic Routing (RIP)
Dynamic Routing enables the gateway to automatically adjust
to physical changes in the networks layout and exchange
routing tables with other routers or gateways. The gateway
determines the network packets' route based on the fewest
number of hops between the source and destination.
Note : This feature is only available if Router is selected for
Operating Mode.

To disable the Dynamic Routing feature for all data
transmissions, keep the default setting,
Disable .

To enable the Dynamic Routing feature for the WAN access,
select
WAN (Internet) .

To enable this feature for the LAN and wireless access,
select
LAN & Wi-Fi .

To enable the feature for both the WAN and LAN, select
Both .