Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
79
4
•
Software Revision
—Switch software revision number.
•
Manufacturer Name
—Switch manufacturer name.
•
Model Name
—Switch model name.
•
Asset ID
—LLDP-MED asset ID for the switch.
Location:
•
Subtype
—Select one of the following options to configure how the switch
location is identified in TLVs:
-
Coordinate Based
—Switch location is identified by using GPS
coordinates in hexadecimal format.
-
Civic Address
—Switch location is identified by using a geographic
description of the location, such as city, street name, and building name.
(The characters ', ", %, and ? are not supported.)
-
ELIN
—Switch location is identified by using the Emergency Location
Identification Number of the switch.
•
Location Information
—Switch location information, in the format specified
by the Subtype field.
Extended PoE:
•
PoE Device Type
—If PoE functionality is advertised, this field indicates
whether the device is a Powered Device (PD) or Power Sourcing Equipment
(PSE).
Extended PoE PD:
If the device is powered by PoE, the following properties can be advertised:
•
PoE Power Value
—Power in watts requested by the device.
•
PoE Power Source
—Indicates how the powered device receives power:
-
Primary
—A power supply is connected directly to the device.
-
Backup
—The device receives power from a PoE power sourcing
equipment.
•
PoE Power Priority
—Displays High, Low, or Critical to indicate how the
port is prioritized when there is less PoE power to deliver than requested by
all powered devices.
