Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
77
4
•
Management Address
—The management port IP address (see the
IPv4
Interface
page or the
IPv6 Interface
page).
•
Port ID SubType
—The type of the port identifier.
•
Port ID
—The port identifier.
•
Port Description
—The port description.
•
System Capabilities Enabled
—The capabilities that are enabled on the
switch.
•
System Capabilities Supported
—The capabilities that are currently
advertised as supported by the switch.
The following switch parameters are advertised in location TLVs.
•
Subtype
—The supported type of location information (civic, ELIN, or
coordinate-based).
•
Coordinates
—Switch GPS coordinates in hexadecimal format, if
coordinate-based location information type is used.
•
ELIN Address
—The ELIN number, if this location information type is used.
•
Country
—Country where the city is located, if the civic location information
type is used.
•
City
—City where the street is located, if the civic location information type
is used.
•
Street
—Street where the building is located, if the civic location information
type is used.
•
Building
—Building in which the switch is located, if the civic location
information type is used.
