Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
75
4
To configure these settings on a port:
STEP 1
Click
Administration
>
Discovery - LLDP-MED
>
LLDP MED Port Settings
in the
navigation window.
Each entry in the LLDP MED Port Settings Table displays the LLDP-MED
configuration for a port.
STEP 2
Select a port to configure and click
Edit
.
STEP 3
Specify the following for the selected port:
•
LLDP MED Status
—Select to enabled LLDP-MED operation on the port.
•
Configuration Notification
—Select to enable the switch to send
notifications when there are topology changes on the network.
STEP 4
Select the Available TLVs that you want the port to include in LLDP
advertisements:
•
Network Policy
—VLAN ID, the 802.1p class-of-service value, and the
Differentiated Services Code Point (DSCP) value. This information is used to
implement the Voice VLAN feature (see
Voice and Media
).
•
Location
—Hexadecimal GPS location coordinates for the switch.
•
PSE
—Indicates whether the port advertises itself as Power Sourcing
Equipment capable of providing power to a connected Power-over Ethernet
device. This option appears only on SG200-08p devices.
•
PD
—Indicates whether the port advertises itself as a Powered Device,
capable of receiving Power-over-Ethernet. This option can be selected only
for port g1 of SG200-08 devices.
•
Inventory
—Hardware and software version information.
•
System Capabilities
—Identifies the basic functionality of the switch such as
bridging.
STEP 5
Click
Apply
and then click
Close
. Your changes are saved to the Running
Configuration.
NOTE
You can click
Configure Network Policy
to display the
Media VLAN
page. (You can
also click
VLAN Management > Voice and Media > Media VLAN
in the navigation
window.) This page enables you to assign LLDP-MED applications to VLANs and
configure priority settings for associated traffic.
