Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
74
4
STEP 3
Specify the Location Parameters to identify the physical location of the switch for
emergency calls:
•
Subtype
—Select one of the following options to configure how the switch
location is identified in TLVs:
-
Coordinate Based
—Switch location is identified using GPS coordinates
in hexadecimal format.
-
Civic Address
—Switch location is identified using a geographic
description of the location, such as city, street name, and building name.
The characters ', ", %, and ? are not supported.
-
ELIN
—Switch location is identified using the Emergency Location
Identification Number (ELIN) of the switch.
•
Coordinates
—Switch GPS coordinates in hexadecimal format.
•
ELIN Address
—The ELIN number.
•
Country
—Country where the city is located.
•
City
—City where the street is located.
•
Street
—Street where the building is located.
•
Building
—Building in which the switch is located.
STEP 4
Click
Apply
. Your changes are saved to the Running Configuration.
Configuring LLDP-MED on a Port
The LLDP for Media Endpoint Devices (LLDP-MED) protocol provides extensions
to the LLDP standard for network configuration and policy, device location, Power-
over-Ethernet management, and inventory management.
Use the
LLDP MED Port Settings
page to view and configure LLDP-MED
operation on ports.
