Getting Started
Quick Start Device Configuration
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
10
2
Logging Out
By default, the application automatically logs you out after 10 minutes of inactivity.
See
Configuring the Idle Session Timeout
for instructions on changing the
default timeout period.
To log out at any time, click
Logout
in the top right corner of any page.
!
CAUTION
Unless the Running Configuration is copied to the Startup Configuration file type,
all changes made since the last time the file type was saved are lost if the switch is
rebooted. We recommend that you save the Running Configuration to the Startup
Configuration file type before logging off to preserve any changes you made
during this session.
A red
X
icon displayed to the left of the Save button indicates that Running
Configuration changes have been made that have not yet been saved to the Startup
Configuration file type.
When you click
Save
, the page displays (see
Downloading and Backing Up the
Configuration and Log Files
). Save the Running Configuration by copying it to the
Startup Configuration file type. After this save, the red
X
icon and the Save button
no longer display.
Quick Start Device Configuration
To simplify device configuration through quick navigation, the
Getting Started
page provides links to the most commonly-used pages.
Links on the Getting Started Page
Category
Link Name (on the Page)
Linked Page
Initial Setup
Change Device IP Address
IPv4 Interface
Create VLAN
Create VLAN
Configure Port Settings
Port Settings
