manualshive.com logo in svg

Cisco Catalyst 2928, Software Configuration Manual

The Cisco Catalyst 2928 is a highly reliable network switch designed to deliver unparalleled performance. With advanced features and seamless connectivity, it empowers organizations with efficient network operations. To maximize its potential, users can easily download the comprehensive Software Configuration Manual for free from our website, manualshive.com.

Share
Download
background image

 

8-29

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Chapter 8      Configuring Switch-Based Authentication

Controlling Switch Access with RADIUS

Configuring Settings for All RADIUS Servers

Beginning in privileged EXEC mode, follow these steps to configure global communication settings 
between the switch and all RADIUS servers:

To return to the default setting for the retransmit, timeout, and deadtime, use the 

no

 forms of these 

commands.

Configuring the Switch to Use Vendor-Specific RADIUS Attributes

The Internet Engineering Task Force (IETF) draft standard specifies a method for communicating 
vendor-specific information between the switch and the RADIUS server by using the vendor-specific 
attribute (attribute 26). Vendor-specific attributes (VSAs) allow vendors to support their own extended 
attributes not suitable for general use. The Cisco RADIUS implementation supports one vendor-specific 
option by using the format recommended in the specification. Cisco’s vendor-ID is 9, and the supported 
option has vendor-type 1, which is named 

cisco-avpair

. The value is a string with this format:

protocol : attribute sep value *

Protocol

 is a value of the Cisco protocol attribute for a particular type of authorization. 

Attribute

 and 

value

 are an appropriate attribute-value (AV) pair defined in the Cisco specification, and 

sep

 

is 

=

 for mandatory attributes and is 

*

 for optional attributes. The full set of features available for 

authorization can then be used for RADIUS. 

For example, this AV pair activates Cisco’s 

multiple named ip address pools

 feature during IP 

authorization (during PPP IPCP address assignment):

cisco-avpair= 

”ip:addr-pool=first“

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

radius-server key

 

string

Specify the shared secret text string used between the switch and all 
RADIUS servers.

Note

The key is a text string that must match the encryption key used on 
the RADIUS server. Leading spaces are ignored, but spaces within 
and at the end of the key are used. If you use spaces in your key, do 
not enclose the key in quotation marks unless the quotation marks 
are part of the key.

Step 3

radius-server retransmit

 

retries

Specify the number of times the switch sends each RADIUS request to the 
server before giving up. The default is 3; the range 1 to 1000.

Step 4

radius-server timeout

 

seconds

Specify the number of seconds a switch waits for a reply to a RADIUS 
request before resending the request. The default is 5 seconds; the range is 
1 to 1000.

Step 5

radius-server deadtime

 

minutes

Specify the number of minutes a RADIUS server, which is not responding 
to authentication requests, to be skipped, thus avoiding the wait for the 
request to timeout before trying the next configured server. The default is 
0; the range is 1 to 1440 minutes.

Step 6

end

Return to privileged EXEC mode.

Step 7

show running-config

Verify your settings.

Step 8

copy running-config startup-config

(Optional) Save your entries in the configuration file.

Summary of Contents for Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2928

Konica Minolta Network Setup Network Setup Manual preview
Network Setup
Brand: Konica Minolta Pages: 38
Western Digital My Net N750 Start Here Manual preview
My Net N750
Brand: Western Digital Pages: 8
MicroNet BroadLink SP3353 Installation Manual preview
BroadLink SP3353
Brand: MicroNet Pages: 66
RAIDAGE DAGE312UTL-NAS User Manual preview
DAGE312UTL-NAS
Brand: RAIDAGE Pages: 60
red lion Yaskawa 2000 Information Sheet preview
Yaskawa 2000
Brand: red lion Pages: 5
Zoom 4401F Specification Sheet preview
4401F
Brand: Zoom Pages: 2
Gigamon GigaVUE H TA100-CXP Hardware Installation Manual preview
GigaVUE H TA100-CXP
Brand: Gigamon Pages: 115
Telit Wireless Solutions WE866C3 User Manual preview
WE866C3
Brand: Telit Wireless Solutions Pages: 37
Cabletron Systems TRXMIM-24A User Manual preview
TRXMIM-24A
Brand: Cabletron Systems Pages: 56
Acard ARS-2212 User Manual preview
ARS-2212
Brand: Acard Pages: 43
Juniper EX4600 Hardware Manual preview
EX4600
Brand: Juniper Pages: 230
MikroTik wAP series User Manual preview
wAP series
Brand: MikroTik Pages: 5
SeaLevel 2423 User Manual preview
2423
Brand: SeaLevel Pages: 25
Tripp Lite N304-09M Specification Sheet preview
N304-09M
Brand: Tripp Lite Pages: 2
Siemens SL2-141-I Quick Start Manual preview
SL2-141-I
Brand: Siemens Pages: 24
Siemens SLI-5310 User Manual preview
SLI-5310
Brand: Siemens Pages: 128
Siemens SL2-141 User Manual preview
SL2-141
Brand: Siemens Pages: 144
Produal HLS34 Installation Instructions Manual preview
HLS34
Brand: Produal Pages: 8

Brands by name

Popular brands

Load more brands