manualshive.com logo in svg

Cisco Catalyst 2928, Software Configuration Manual

The Cisco Catalyst 2928 is a highly reliable network switch designed to deliver unparalleled performance. With advanced features and seamless connectivity, it empowers organizations with efficient network operations. To maximize its potential, users can easily download the comprehensive Software Configuration Manual for free from our website, manualshive.com.

Share
Download
background image

 

1-10

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Chapter 1      Overview

Default Settings After Initial Switch Configuration

•

IGMP snooping is enabled. No IGMP filters are applied. For more information, see 

Chapter 21, 

“Configuring IGMP Snooping.”

•

IGMP throttling setting is deny. For more information, see 

Chapter 21, “Configuring IGMP 

Snooping.”

•

The IGMP snooping querier feature is disabled. For more information, see 

Chapter 21, “Configuring 

IGMP Snooping.”

•

Port-based traffic

–

Broadcast, multicast, and unicast storm control is disabled. For more information, see 

Chapter 22, “Configuring Port-Based Traffic Control.”

–

No protected ports are defined. For more information, see 

Chapter 22, “Configuring Port-Based 

Traffic Control.”

–

Unicast and multicast traffic flooding is not blocked. For more information, see 

Chapter 22, 

“Configuring Port-Based Traffic Control.”

–

No secure ports are configured. For more information, see 

Chapter 22, “Configuring Port-Based 

Traffic Control.”

•

CDP is enabled. For more information, see 

Chapter 23, “Configuring CDP.”

•

UDLD is disabled. For more information, see 

Chapter 25, “Configuring UDLD.”

•

SPAN disabled. For more information, see 

Chapter 26, “Configuring SPAN.”

•

RMON is disabled. For more information, see 

Chapter 27, “Configuring RMON.”

•

Syslog messages are enabled and appear on the console. For more information, see 

Chapter 28, 

“Configuring System Message Logging.”

•

SNMP is enabled (Version 1). For more information, see 

Chapter 29, “Configuring SNMP.”

•

QoS is disabled. For more information, see 

Chapter 31, “Configuring QoS.”

•

No EtherChannels are configured. For more information, see 

Chapter 32, “Configuring 

EtherChannels.”

•

DHCP snooping is disabled. The DHCP snooping information option is enabled. For more 
information, see 

Chapter 20, “Configuring DHCP Features and IP Source Guard Features.”

•

IP source guard is disabled. For more information, see 

Chapter 20, “Configuring DHCP Features 

and IP Source Guard Features.”

•

DHCP server port-based address allocation is disabled. For more information, see 

Chapter 20, 

“Configuring DHCP Features and IP Source Guard Features.”

•

Dynamic ARP inspection is disabled on all VLANs. For more information, see 

Chapter 21, 

“Configuring Dynamic ARP Inspection.”

•

No ACLs are configured. For more information, see 

Chapter 31, “Configuring Network Security 

with ACLs.”

Summary of Contents for Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2928

IBM 3708 Description preview
3708
Brand: IBM Pages: 342
8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 66
Ubiquiti U5-24-500W Quick Start Manual preview
U5-24-500W
Brand: Ubiquiti Pages: 23
MikroTik RouterBOARD Groove Quick Setup Manual And Warranty Information preview
RouterBOARD Groove
Brand: MikroTik Pages: 4
VCS VideoJet 100 Manual preview
VideoJet 100
Brand: VCS Pages: 118
Abocom PLS342 Specification Sheet preview
PLS342
Brand: Abocom Pages: 2
IDT Tsi310TM User Manual preview
Tsi310TM
Brand: IDT Pages: 207
ADC HiGain H2TU-R-402 List 7A Quick Installation preview
HiGain H2TU-R-402 List 7A
Brand: ADC Pages: 7
Renesas H8S/2633 User Manual preview
H8S/2633
Brand: Renesas Pages: 28
ZyXEL Communications P-660R-TX V3 Support Notes preview
P-660R-TX V3
Brand: ZyXEL Communications Pages: 66
ADC HiGain H4TU-R-402 List 5A Quick Installation preview
HiGain H4TU-R-402 List 5A
Brand: ADC Pages: 7
Dantel 44118 Installation & Operation Manual preview
44118
Brand: Dantel Pages: 22
PairGain HiGain Line Unit HLU-388 Quick Installation Manual preview
HiGain Line Unit HLU-388
Brand: PairGain Pages: 7
Black Box LGB2003A User Manual preview
LGB2003A
Brand: Black Box Pages: 62
PC Concepts Full-Rated Router ADSL2+ User Manual preview
Full-Rated Router ADSL2+
Brand: PC Concepts Pages: 104
mikroElektronika mikroETH 100 Manual preview
mikroETH 100
Brand: mikroElektronika Pages: 6
ADTRAN NetVanta 1224R Specifications preview
NetVanta 1224R
Brand: ADTRAN Pages: 4
Paradyne FrameSaver DSL 9783 CSU/DSU User Manual preview
FrameSaver DSL 9783 CSU/DSU
Brand: Paradyne Pages: 233

Brands by name

Popular brands

Load more brands