manualshive.com logo in svg

Cisco Catalyst 2928, Software Configuration Manual

The Cisco Catalyst 2928 is a highly reliable network switch designed to deliver unparalleled performance. With advanced features and seamless connectivity, it empowers organizations with efficient network operations. To maximize its potential, users can easily download the comprehensive Software Configuration Manual for free from our website, manualshive.com.

Share
Download
background image

 

B-21

Catalyst 2928 Switch Software Configuration Guide

OL-23389-01

Appendix B      Working with the Cisco IOS File System, Configuration Files, and Software Images

Working with Software Images

Copying Image Files By Using TFTP

You can download a switch image from a TFTP server or upload the image from the switch to a TFTP 
server.

You download a switch image file from a server to upgrade the switch software. You can overwrite the 
current image with the new one or keep the current image after a download.

You upload a switch image file to a server for backup purposes; this uploaded image can be used for 
future downloads to the same or another switch of the same type.

Note

Instead of using the 

copy

 privileged EXEC command or the 

archive tar

 privileged EXEC command, we 

recommend using the 

archive download-sw

 and 

archive upload-sw 

privileged EXEC commands to 

download and upload software image files. 

These sections contain this configuration information:

•

Preparing to Download or Upload an Image File By Using TFTP, page B-21

•

Downloading an Image File By Using TFTP, page B-22

•

Uploading an Image File By Using TFTP, page B-24

Preparing to Download or Upload an Image File By Using TFTP

Before you begin downloading or uploading an image file by using TFTP, do these tasks:

•

Ensure that the workstation acting as the TFTP server is properly configured. On a Sun workstation, 
make sure that the /etc/inetd.conf file contains this line:

tftp dgram udp wait root /usr/etc/in.tftpd in.tftpd -p -s /tftpboot

Make sure that the /etc/services file contains this line:

tftp 69/udp

Note

You must restart the inetd daemon after modifying the /etc/inetd.conf and /etc/services files. 
To restart the daemon, either stop the inetd process and restart it, or enter a 

fastboot

 

command (on the SunOS 4.x) or a 

reboot 

command

 

(on Solaris 2.x or SunOS 5.x). For more 

information on the TFTP daemon, see the documentation for your workstation.

total_image_file_size

Specifies the size of all the images (the Cisco IOS image and the web management files) in the 
tar file, which is an approximate measure of how much flash memory is required to hold them

image_feature

Describes the core functionality of the image

image_min_dram

Specifies the minimum amount of DRAM needed to run this image

image_family

Describes the family of products on which the software can be installed

Table B-3

info File Description (continued)

Field

Description

Summary of Contents for Catalyst 2928





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Catalyst 2928

Supermicro SC836 X9 User Manual preview
SC836 X9
Brand: Supermicro Pages: 24
Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual preview
NetIron MLXe Series
Brand: Brocade Communications Systems Pages: 305
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Brand: AYRSTONE Pages: 2
Maipu SM3100-28TC-AC Install Manual preview
SM3100-28TC-AC
Brand: Maipu Pages: 19
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Brand: KYLAND Technology Pages: 24
2N Telekomunikace ATEUS STARGATE User Manual preview
ATEUS STARGATE
Brand: 2N Telekomunikace Pages: 67
Altimium CVHH2 User Manual preview
CVHH2
Brand: Altimium Pages: 12
Enterasys Security Router X-PeditionTM User Manual preview
Security Router X-PeditionTM
Brand: Enterasys Pages: 466
Flexwatch FW3870 User Manual preview
FW3870
Brand: Flexwatch Pages: 13
Quantum FC1202 User Manual preview
FC1202
Brand: Quantum Pages: 108
TRENDnet TEW-752DRU User Manual preview
TEW-752DRU
Brand: TRENDnet Pages: 68
Telit Wireless Solutions WE866C3 User Manual preview
WE866C3
Brand: Telit Wireless Solutions Pages: 37
Eneo PNR-5332/3TB Quick Installation Manual preview
PNR-5332/3TB
Brand: Eneo Pages: 49
Tripp Lite N201-100-GY-P Specification Sheet preview
N201-100-GY-P
Brand: Tripp Lite Pages: 2
Paradyne FrameSaver DSL 9783 CSU/DSU User Manual preview
FrameSaver DSL 9783 CSU/DSU
Brand: Paradyne Pages: 233
Crestron 4 Channel Fan Speed Control Module CLX-1FAN4 Specifications preview
4 Channel Fan Speed Control Module CLX-1FAN4
Brand: Crestron Pages: 1
Crestron CNXIRP Installation Instructions preview
CNXIRP
Brand: Crestron Pages: 2
Dahua H Series Quick Start Manual preview
H Series
Brand: Dahua Pages: 20

Brands by name

Popular brands

Load more brands