Cisco 8811 User Manual Download | Manualshive

Page: 143 / 146

background image

FCC Part 15.21 Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the
user

’

s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter
must be at least 20 cm from the user and must not be collocated or operating in conjunction with any other
antenna or transmitter.

FCC Receivers and Class B Digital Statement

This product has been tested and complies with the specifications for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used according to the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which is found by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment or devices

•

Connect the equipment to an outlet other than the receiver's

•

Consult a dealer or an experienced radio/TV technician for assistance

Cisco Product Security Overview

This product contains cryptographic features and is subject to United States and local country laws governing
import, export, transfer, and use. Delivery of Cisco cryptographic products does not imply third-party authority
to import, export, distribute, or use encryption. Importers, exporters, distributors, and users are responsible
for compliance with U.S. and local country laws. By using this product you agree to comply with applicable
laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.

Further information regarding U.S. export regulations may be found at

http://www.bis.doc.gov/

policiesandregulations/ear/index.htm

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager 10.5

133

Product Safety and Security

FCC Part 15.21 Statement

«
...
141
142
143
144
145
...
»

Summary of Contents for 8811



















































































































































Reviews:

No comments

Related manuals for 8811

SCH-i600 Series

Brand: Samsung Pages: 12

SGH-t329 Series

Brand: Samsung Pages: 143

Brand: Xiaomi Pages: 16

Brand: Samsung Pages: 343

3300 IP 5312 IP

Brand: Mitel Pages: 10

Brand: UniData Communication Systems Pages: 41

Vigilantplant SMARTDAC+ Series

Brand: YOKOGAWA Pages: 31

Clarity Series BG1200-G

Brand: Transense Pages: 14

Brand: ATCOM Pages: 10

Brand: Grandstream Networks Pages: 11

Brand: iData Pages: 38

Brand: Allworx Pages: 6

Brand: Tecno Mobili Pages: 16

Brand: Avaya Pages: 3

Brand: Unimax Pages: 95

Brand: Zte Pages: 113

Mi Note 10 Lite

Brand: Xiaomi Pages: 101

ALIGATOR S6500 Senior

Brand: ADART COMPUTERS Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands