Cisco 8811 User Manual Download

Page: 44 / 146

•

If you have multiple lines and want to pick up the call on a nonprimary line, first press the desired line
button, then press

PickUp

If your phone supports autopickup, you are connected to the call.

Step 2

If the call rings, press

Answer

to connect to the call.

Answer a Call Using Group PickUp and a Phone Number

Procedure

Step 1

Perform one of the following actions:

•

Press

Group PickUp

•

If you have multiple lines and want to pick up the call on a nonprimary line, first press the desired line
button, and then press

Group PickUp

Step 2

Enter the number of the phone line with the call that you want to pick up.
For example, if the call is ringing on line 12345, enter 12345.

If your phone supports autopickup, you are now connected to the call.

Step 3

If the call rings, press

Answer

to connect to the call.

Answer a Call Using Group PickUp and a Group PickUp Number

Procedure

Step 1

Perform one of the following actions:

•

Press

Group PickUp

to answer a call on a phone outside your pickup group.

•

If you have multiple lines and want to pick up the call on another line, first press the desired line button,
then press

Group PickUp

Step 2

Enter the group pickup number.
If your phone supports autopickup, you are now connected to the call.

Step 3

If the call rings, press

Answer

to connect to the call.

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager

10.5

Basic Operations

Call Pickup

Summary of Contents for 8811



















































































































































Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands

Cisco 8811, User Manual

Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands