Cisco 8811 User Manual Download

Page: 68 / 146

Dial From the Call History

Procedure

Step 1

If the phone is not in idle state, perform the following steps:

a) Press

Applications

and select

Recents

b) Select the call record that you want to dial and perform one of the following:

•

Press

Call

•

Pick up the handset.

•

Press

Details

•

Press

Speakerphone

Headset

Step 2

If the phone is in idle state, press down on the Navigation cluster and Select button to display the On-Hook
Dialing screen.

Edit a Phone Number

Procedure

Step 1

Press

Applications

and select

Recents

Step 2

Press

All Lines

or the required line.

Step 3

Select the call you want to edit and press

EditDial

Press the Navigation pad right or left to move the
cursor.

Press

to delete the character to the left of the cursor.

Note

Step 4

Press

Call

to dial the number.

Step 5

Press

Return

to return to the Call History list.

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager

10.5

Call History

Dial From the Call History

Summary of Contents for 8811



















































































































































Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands

Cisco 8811, User Manual

Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands