Cisco 8811 User Manual Download

Page: 62 / 146

Assign a Fast Dial Code to a Personal Directory Entry

Procedure

Step 1

Press

Contacts

Step 2

Select

Personal Directory

Step 3

Select

Personal Address Book

Step 4

Enter the name and press

Submit

Step 5

Press

Select

and then press

FastDial

Step 6

Select a number and press

Select

Step 7

Scroll to an unassigned fast-dial index and press

Submit

Place a Call Using a Fast Dial Code

Procedure

Step 1

Press

Contacts

Step 2

Step 3

Select

Personal Fast Dials

and scroll to a fast-dial code.

To get more fast-dial codes, press

Next

Note

Step 4

Select the required fast-dial code and press

Call

Delete a Fast Dial Code

Procedure

Step 1

Press

Contacts

Step 2

Step 3

Select

Personal Fast Dials

and search for a fast-dial code.

Step 4

Select the required code and press

Remove

Step 5

Select the index and press

Remove

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager

10.5

Contacts

Assign a Fast Dial Code to a Personal Directory Entry

Summary of Contents for 8811



















































































































































Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands

Cisco 8811, User Manual

Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands