Cisco 8811 User Manual Download

Page: 104 / 146

Notes

Supported

Feature

Yes

All Calls Programmable Line Key

Yes

Answer Programmable Line Key

Conference is the only feature
supported.

Yes

Unified Session Presentation

Your voicemail will not be
synchronized with other users in
the Cisco Unified Communications
Manager cluster.

Yes

Voicemail

Yes

Speed Dial

Yes

Service IRL Programmable Line
Key

The iDivert softkey does not
display.

To Voicemail (iDivert)

Lines are supported but cannot be
shared.

Partial

Line Filters

The Park softkey does not display.

Park Monitoring

The Merge softkey does not
display.

Merge

Message count badges do not
appear on the phone screen.

Only the Message Waiting icon
displays.

Enhanced Message Waiting
Indication

The softkey does not display.

Directed Call Park

Calls remain on hold indefinitely.

Hold Reversion

Calls appear as Local Hold calls.

Remote Hold

The Meet Me softkey does not
display.

Meet Me

The softkey causes no action.

PickUp

The softkey causes no action.

Group PickUp

The softkey causes no action.

Other PickUp

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager

10.5

Advanced Operations

Survivable Remote Site Telephony Overview

Summary of Contents for 8811



















































































































































Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands

Cisco 8811, User Manual

Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands