Cisco 8811 User Manual Download

Page: 73 / 146

C H A P T E R

Advanced Calling Features

•

Conference, page 63

•

Meet Me Conference, page 65

•

Speed Dial, page 66

•

Do Not Disturb, page 68

•

Malicious Call Identification, page 69

•

Extension Mobility, page 69

•

Mobile Connect, page 70

•

Line Status, page 72

•

Custom Line Filters, page 73

•

Hunt Groups, page 76

•

Barge , page 77

•

Call Chaperone, page 78

•

Uniform Resource Identifier Dialing, page 79

•

Intelligent Proximity for Mobile Devices, page 80

•

Intelligent Proximity for Tablets, page 84

Conference

Conference allows you to talk simultaneously with multiple parties in an ad hoc meeting.

When you are talking on a call, use

Conference

to dial another party and add them to the call.

If you have multiple phone lines, you can alternately use

Conference

to combine two calls across two lines.

For example, if you have a call on Line 1 and a call on Line 2, you can combine the calls into a conference.

As the conference host, you can remove individual participants from the conference. The conference ends
when all participants hang up.

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager 10.5

Summary of Contents for 8811



















































































































































Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands

Cisco 8811, User Manual

Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands