Cisco 8811 User Manual Download

Page: 75 / 146

Procedure

Step 1

Call a new conference participant, but do not add the participant to the conference.
You must wait until the call is connected.

Step 2

Press

Swap

to toggle between the participant and the conference.

View Conference Participants

You can view the details of the last 16 participants who joined the conference.

Procedure

While in a conference, press

Show Details

to view a list of participants.

When you place a call to another party and the person that you called creates a conference with a
third phone, the

Show Details

softkey displays only for the person who created the conference.

Note

Remove Conference Participants

Procedure

Step 1

While in a conference, press

Show Details

Step 2

Highlight the participant that you want to remove, then press

Remove

Meet Me Conference

Meet Me allows you to call a predetermined number at a scheduled time to host or join a Meet Me conference.

The Meet Me conference begins when the host connects. Participants who call the conference before the host
has joined hear a busy tone and must dial again.

The conference ends when all participants hang up; the conference does not automatically end when the host
disconnects.

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager 10.5

Advanced Calling Features

View Conference Participants

Summary of Contents for 8811



















































































































































Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands

Cisco 8811, User Manual

Search results

Summary of Contents for 8811

Reviews:

Related manuals for 8811

Brands by name

Popular brands