Cisco 8800 Series, Manual

Page: 390 / 544

Description Parameter
Indicates the refer-to target.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Refer-To_Target_Contact_1_
ua="na">No</Refer-To_Target_Contact_1_>
• In the phone web page, select
Yes
to send the
SIP Refer to the contact.
Allowed values: Yes|No
Default: No
Refer-To Target Contact
Specifies the Referee Bye Delay time in seconds.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Referee_Bye_Delay_1_
ua="na">0</Referee_Bye_Delay_1_>
• In the phone web page, enter the appropriate
period of time in seconds.
Allowed values: An integer from 0 through 65535
Default: 0
Referee Bye Delay
Specifies the Refer Target Bye Delay time in seconds.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Refer_Target_Bye_Delay_1_
ua="na">0</Refer_Target_Bye_Delay_1_>
• In the phone web page, enter the appropriate
period of time in seconds.
Allowed values: An integer from 0 through 65535
Default: 0
Refer Target Bye Delay
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
370
Cisco IP Phone Installation
Parameters for SIP Settings on Extensions