Cisco 8800 Series, Manual

Page: 385 / 544

Description Parameter
AVT dynamic payload type for the 16 kHz clock rate.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<AVT_16kHz_Dynamic_Payload
ua="na">107</AVT_16kHz_Dynamic_Payload>
• In the phone web page, enter the payload.
Range: 96-127
Default: 107
AVT 16 kHz Dynamic Payload
AVT dynamic payload type for the 48 kHz clock rate.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<AVT_48kHz_Dynamic_Payload
ua="na">108</AVT_48kHz_Dynamic_Payload>
• In the phone web page, enter the payload.
Range: 96-127
Default: 108
AVT 48 kHz Dynamic Payload
Configure the SIP Settings for Extensions
Before you begin
Access the phone administration web page. See Access the Phone Web Interface, on page 104 .
Procedure
Step 1
Select Voice > Ext(n) , where n is an extension number.
Step 2 In the
SIP Settings
section, set the parameter values as described in the Parameters for SIP Settings on
Extensions, on page 366 table.
Step 3 Click Submit All Changes .
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
365
Cisco IP Phone Installation
Configure the SIP Settings for Extensions