Cisco 8800 Series Manual Download

Page: 429 / 544

• it-IT (Italian)

• ja-JP (Japanese)

• ko-KR (Korean)

• nl-NL (Dutch)

• nn-NO (Norwegian)

• pl-PL (Polish)

• pt-BZ (Portuguese-Brazil)

• pt-PT (Portuguese-Portugal)

• ru-RU (Russian)

• sk-SK (Slovak)

• sv-SE (Swedish)

• tr-TR (Turkish)

• zh-CN (Chinese-Simplified)

• zh-HK (Chinese-Hong Kong)

• bg-BG (Bulgarian)

• ca-ES (Catalan)

• cs-CZ (Czech)

• da-DK (Danish)

• de-DE (German)

• en-AU (English-Australia)

• en-CA (English-Canada)

• en-GB (English-Great Britain)

• en-NZ (English-New Zealand)

• en-US (English-United States)

• es-ES (Spanish-Spain)

• es-MX (Spanish-Mexico)

• fi-FI (Finish)

• fr-FR (French-France)

• hr-HR (Hungarian)

Set Up Dictionaries and Fonts

Languages other than English require dictionaries. Some languages also require a font.

Procedure

Step 1

Download the locale zip file for your firmware version, from cisco.com. Place the file on your server, and
unzip the file.

Dictionaries and fonts for all the supported languages are included in the zip file. Dictionaries are XML scripts.
Fonts are standard TTF files.

Step 2

On the phone administration web page, go to

Admin Login

Advanced

Voice

Regional

. In the

Language

section, specify the necessary parameters and values in the

Dictionary Server Script

field as described below.

Use a semicolon (;) to separate multiple parameter and value pairs.

• Specify the location of the dictionary and font files with the

serv

parameter.

For example:

serv=http://10.74.128.101/Locales/

Make sure to include the IP address of the server, the path, and folder name.

• For each language that you want to set up, specify a set of parameters as described below.

Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later

409

Cisco IP Phone Installation

Set Up Dictionaries and Fonts

Summary of Contents for 8800 Series
































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8800 Series

Reviews:

Related manuals for 8800 Series

Brands by name

Popular brands

Cisco 8800 Series, Manual

Search results

Summary of Contents for 8800 Series

Reviews:

Related manuals for 8800 Series

Brands by name

Popular brands