Cisco 8800 Series, Manual

Page: 409 / 544

Description Parameter
Enables to insert the received parameter into the VIA header of SIP responses if the
received-from IP and VIA sent-by IP values differ.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Insert_VIA_received ua="na">Yes</Insert_VIA_received>
• In the phone web page, set to
Yes
.
Default: No
Insert VIA received
Enables to insert the rport parameter into the VIA header of SIP responses if the
received-from IP and VIA sent-by IP values differ.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Insert_VIA_rport ua="na">Yes</Insert_VIA_rport>
• In the phone web page, set to Yes .
Default: No
Insert VIA rport
Enables the user to use NAT-mapped IP:port values in the VIA header.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Substitute_VIA_Addr ua="na">Yes</Substitute_VIA_Addr>
• In the phone web page, set to
Yes
.
Default: No
Substitute VIA Addr
Enables to send responses to the request source port instead of the VIA sent-by port.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Send_Resp_To_Src_Port ua="na">Yes</Send_Resp_To_Src_Port>
• In the phone web page, set to Yes .
Default: No
Send Resp To Src
Port
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
389
Cisco IP Phone Installation
NAT Mapping with Static IP Parameters