Chapter 3 Configuration of the Cisco IP Conference Station 7935
Verifying Firmware Version Information
3-12
Cisco IP Conference Station 7935 Administration Guide
78-12727-03
Step 3
Press the Save softkey to save your change.
Step 4
Press the Down scroll button to select Alt TFTP Addr.
Use the dialing pad to enter a new Alternate TFTP Server address.
Use the . softkey to enter periods (.), and the < softkey to correct any mistakes.
Step 5
Press the Save softkey to save your changes.
Configuring the HTTP Port
For increased security, you might want to change the HTTP Port number. Follow
these steps to set the HTTP Port.
Step 1
Press the Up or Down scroll button to select HTTP Port Change, and then press
the Select button.
Step 2
In the HTTP Port field, enter a new HTTP port number.
Note
The default value is 80. You can enter any number. Users will have to use
this number suffixed to the IP address of the IP Conference Station when
they access the Web interface.
Step 3
Press the Save softkey to save your changes.
Verifying Firmware Version Information
You can obtain information about the firmware version installed on the
IP Conference Station.
Follow these steps to verify the firmware version on an IP Conference Station.
Step 1
Press the Menu button.
Step 2
Press the Up or Down scroll button to select System Information.
